How to maintain dispensing equipment

 

The quality of daily maintenance of dispensing equipment directly affects the service life of equipment, including the stability and strength of normal use. The recommended daily maintenance steps are as follows:

 

331 Glue Filling Equipment

 

1. If the inlet is abnormal or there is water, please clear the water in the pressure regulating filter or check whether the air pressure source is abnormal. Before using a large number of dispensing equipment, please try a small amount to master the use of product skills to reduce the probability of errors. When there is no problem in the test, then use in batches, and choose vacuum device to eliminate it. The bubbles produced in the mixing process, or glue, can be stationary for 10-20 minutes before use, eliminating the bubbles generated in the mixing process in time, so that more glue can be mixed together to facilitate the maintenance of dispensing equipment and put into coating bonding.

 

Desktop glue filling automaton

 

2. Replace the glue and clean the pipe. At this time, first close the feed valve of the high-speed dispensing equipment and then open the discharge valve. After discharging the remaining glue from the pressure barrel, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber barrel and start the machine. Then press the solvent out and wash out according to the normal operation mode to complete the cleaning of the dispensing equipment maintenance. Work.

 

 

 

3. The maintenance of dispensing equipment is very important, that is, when the machine is shut down for a long time, it can not only prolong the service life of the machine, but also save a lot of electricity. With the changing needs of industrial development, liquid control technology and equipment are also developing towards high-precision control, diversification and specialization.

 

Automatic filling dispenser

 

4. Please wipe machine parts regularly to prolong their service life. The more glue is mixed together, the faster the reaction will be, and the faster the curing speed will be. Therefore, glue should be mixed reasonably according to actual production conditions, otherwise it will cause waste of glue. The maintenance of dispensing equipment is to eliminate possible problems and improve production efficiency. Nowadays, liquid control technology and high-speed dispensing equipment are widely used in various fields of modern industry.